ART-E1 Electrosurgery Unit for Dental Clinics – Features & Price in Nepal

Introduction

The ART-E1 Electrosurgery Unit (ESU) by Bonart / ART Electron is a reliable dental electrosurgical device designed for precise soft tissue cutting and coagulation. It is widely used in dental clinics for procedures such as gingivectomy, crown lengthening, and bleeding control. Due to its compact design, stable performance, and affordable cost, the ART-E1 ESU is a popular choice among dentists in Nepal.

What is an Electrosurgery Unit (ESU)?

An Electrosurgery Unit uses high-frequency electrical energy to cut soft tissue or coagulate blood vessels. In dentistry, ESUs help reduce bleeding, improve visibility during procedures, and save clinical time compared to traditional scalpel techniques.

ART-E1 Electrosurgery Unit – Key Features

• Brand: Bonart / ART Electron

• Model: ART-E1

• Designed for dental soft tissue surgery

• Operating modes: CUT, COAG 1, COAG 2

• Adjustable intensity levels from 1 to 10

• Audio and visual activation indicators

• Compact and lightweight design

• Easy-to-use front panel controls

• Supports handpiece and foot switch operation

• Patient (indifferent) plate system for safety

Technical Specifications

• Power supply: 240V AC ±5%, 50/60 Hz

• Power consumption: 120 VA

• Fuse rating: T2A 250V AC

• Operating frequency:

  • CUT mode: approx. 357 ±50 kHz

  • COAG modes: approx. 375 ±50 kHz

• Duty cycle: 10 seconds ON / 30 seconds OFF

• Manufacturer: Bonart Co., Ltd., Taiwan

Front Panel Controls Explained

• Power button: Turns the unit ON or OFF

• Mode selector knob: Select CUT, COAG1, or COAG2

• Intensity control knob: Adjusts output power level ( 0 to 10)

• Active indicator: Shows when RF output is active

• Handpiece connector: For electrosurgical pencil

• Indifferent plate connector: For patient grounding and safety

Dental Applications of ART-E1 ESU

• Gingivectomy

• Gingivoplasty

• Crown lengthening

• Bleeding control during extractions

• Soft tissue contouring

• Tissue management before impression taking

• Minor oral surgical procedures

Advantages of ART-E1 Electrosurgery Unit

• Reduced bleeding during surgery

• Clear and dry surgical field

• Faster healing compared to scalpel surgery

• Minimal tissue trauma

• Easy to operate and maintain

• Cost-effective alternative to dental lasers

Safety Guidelines

• Always connect the patient plate before starting the procedure

• Begin with low intensity (level 1–3) and increase gradually

• Do not exceed the recommended duty cycle

• Ensure proper earthing of the power supply

• Use only compatible accessories and electrodes

ART-E1 Electrosurgery Unit Price in Nepal

The price of ART-E1 Electrosurgery Unit in Nepal depends on the supplier, warranty, and included accessories.

Estimated price range in Nepal:

NPR 85,000 – NPR 1,20,000 (approx.)

For the latest price, availability, and warranty details, please contact us directly.

Why Choose ART-E1 ESU for Your Dental Clinic?

• Ideal for small to medium dental clinics

• Easy servicing and maintenance in Nepal

• Affordable compared to advanced laser systems

• Trusted performance and long-term reliability

If you are looking to purchase the ART-E1 Electrosurgery Unit in Nepal, or need technical guidance and accessories, feel free to contact us.

Contact Us

Have questions about Electrosurgery Unit for Dental Clinics? Fill out the form below and we'll get back to you!

Name:

Email:

Contact Number:

Message:

Digital Ultrasonic Cleaner for Dental Instruments – Complete Guide

How to Use a Digital Ultrasonic Cleaner in a Dental Clinic

(Step-by-Step Guide for Dental Instruments)

Digital Ultrasonic Cleaners are widely used in dental clinics for effective pre-cleaning of instruments before sterilization. Proper use of an ultrasonic cleaner helps remove blood, debris, cement, and contaminants from hard-to-reach areas, improving infection control and extending instrument life.

In this guide, we explain how to use a digital ultrasonic cleaner, recommended settings, safety tips, and common mistakes to avoid in dental practice.

What Is a Digital Ultrasonic Cleaner?

A Digital Ultrasonic Cleaner uses high-frequency ultrasonic waves to create microscopic bubbles in a liquid (a process called cavitation). These bubbles collapse and gently remove dirt and organic material from dental instruments without causing damage.

⚠️ Important: Ultrasonic cleaning is a pre-cleaning process only. It does not replace sterilization such as autoclaving.

Main Parts of a Digital Ultrasonic Cleaner

• Stainless Steel Tank – Holds water or cleaning solution

• Plastic Basket – Prevents instruments from touching the tank bottom

• Transparent Lid – Allows visual monitoring

• Digital Display Panel – Shows time and temperature

• Control Buttons:

  • ON – Start the machine

  • OFF – Stop the machine

  • SET – Set cleaning time

  • TC – Temperature control

• Indicator Lights:

  • 🔴 Red (Heat) – Heater active

  • 🟢 Green (Working) – Ultrasonic operation active

Step-by-Step: How to Use an Ultrasonic Cleaner in Dental Clinics

1. Preparation

• Place the unit on a flat, stable surface

• Fill the tank with clean water or approved ultrasonic cleaning solution

• Never operate the machine without liquid (dry run)

2. Load Dental Instruments

• Place instruments inside the plastic basket

• Do not overload the basket

• Instruments should not touch each other excessively

• Do not place instruments directly on the tank bottom

3. Power On

• Close the lid

• Press the ON button

• The digital display will activate

4. Set Cleaning Time

Use the SET button to select cleaning time:

• 3–5 minutes → Light contamination

• 8–10 minutes → Heavy contamination

5. Set Temperature (Optional)

• Press the TC button to adjust temperature

• Recommended temperature for dental instruments: 40°C – 60°C

• Red indicator light shows heating is active

⚠️ Avoid high temperatures for plastic or heat-sensitive items.

6. Cleaning Process

• Green “Working” light indicates ultrasonic vibration

• The machine runs automatically for the selected time

• Some models beep when the cycle ends

7. After Cleaning

• Remove instruments carefully

• Rinse thoroughly with clean running water

• Dry instruments completely

• Proceed with autoclave sterilization

Best Practices for Dental Clinics

• Change water/solution daily

• Clean the tank after daily use

• Pre-rinse heavily soiled instruments before ultrasonic cleaning

• Use only manufacturer-recommended cleaning solutions

Common Problems and Solutions

Machine turns ON but no vibration

• Water level too low

• Overloaded basket

• Internal transducer issue

Heating not working

• Temperature not set

• Heater element damaged

• Thermal fuse failure

Poor cleaning results

• Old or contaminated solution

• Instruments overcrowded

• Insufficient cleaning time

Maintenance Tips

• Never scrape the tank with sharp objects

• Avoid leaving acidic solutions inside the tank

• Perform regular cleaning with plain water

• Ensure proper ventilation around the unit

Digital ultrasonic cleaner price

The price of Digital Ultrasonic Cleaner is different from one supplier to another. Approximately, the price of CD-4820  model, 2.5Liter as shown above will cost in the range of NPR,20000 - - - 25000/-

Conclusion

A Digital Ultrasonic Cleaner is an essential device for dental clinics, laboratories, and hospitals. When used correctly, it significantly improves instrument cleanliness and supports effective infection control before sterilization.

Disclaimer

This article is for educational purposes only. Ultrasonic cleaning is a pre-cleaning process and does not replace sterilization. Always follow the manufacturer’s instructions and dental infection control protocols.

SafeEndo ReCreate LC-7 Composite Kit Review | Price & Uses

Introduction 

In modern dentistry, composite restorative materials play a vital role in achieving both strength and natural aesthetics. Dentists today look for materials that offer excellent bonding, easy handling, durability, and a natural tooth-like finish. 

SafeEndo ReCreate LC-7 Composite Kit is one such reliable light-cure composite system widely used for routine restorative procedures.

What is SafeEndo ReCreate LC-7 Composite Kit? 

SafeEndo ReCreate LC-7 is a nano-hybrid light-cured composite restorative system suitable for both anterior and posterior restorations. 

This kit is designed as a complete solution, including composite syringes, a bonding agent, and polishing paste—making it convenient for daily clinical use. 

Contents of the Kit 

The SafeEndo ReCreate LC-7 Composite Kit typically includes: 

🦷 Composite Syringes (4 × 4.5 g) 

• Shades: A1, A2, A3, B2 

🧴 ReCreate Bond-7 (5 ml) 

• 7th Generation Light-Cure Bonding Agent 

✨ ProClean Polishing Paste (7–8 g) 

🎨 Shade Guide (may vary by supplier) 

This combination allows dentists to perform restorations from bonding to final polishing using a single kit. 

Key Features

 ✔ Nano-Hybrid Composite Technology 

• Provides high strength with natural aesthetics 

✔ Excellent Polishability 

•  Produces a smooth, high-gloss finish 

✔ Non-Sticky Handling

•   Does not stick to instruments, making placement easier 

✔ Good Radiopacity 

• Clearly visible on X-rays 

✔ Fluorescence Effect 

• Mimics natural tooth appearance under light 

✔ Stable Sculpting

•  Maintains shape during contouring 

Indications (Clinical Applications / Uses) 

SafeEndo ReCreate LC-7 Composite Kit is suitable for: 

• Class I, II, III, IV, and V restorations 
• Anterior and posterior fillings 
• Core build-ups 
• Composite repair procedures 
• Splinting 
• Indirect restorations such as inlays, onlays, and veneers 

Basic Clinical Steps 

1. Tooth preparation and cleaning 
2. Etching (if required) 
3. Apply ReCreate Bond-7 and light cure 
4. Place composite in incremental layers 
5. Light cure using a curing light (400–500 nm)
6.  Finish and polish using ProClean Polishing Paste 

Advantages 

• ✔ Suitable for both beginners and experienced dentists 
• ✔ Cost-effective composite restorative kit 
• ✔ Excellent esthetic results 
• ✔ Widely available in Nepal and nearby markets

 Precautions 

⚠ Do not use with eugenol-containing materials 

⚠ Proper moisture control (rubber dam or cotton rolls) is essential 

⚠ Protect composite from direct sunlight before use 

Price Range 

The approximate market price of SafeEndo ReCreate LC-7 Composite Kit ranges between 6500 ---- 7500 depending on supplier and location. Please contact us for the Verified supplier for the SafeEndo Product. 

Conclusion 

If you are looking for an affordable, reliable, and esthetic light-cure composite system, SafeEndo ReCreate LC-7 Composite Kit is a practical choice for everyday restorative dentistry. Its balanced handling, polishability, and clinical performance make it suitable for routine dental practice.